Troubleshooting

There are six LEDs on the Psyko Amp. The LEDs are a useful tool for visual confirmation of which channels are playing.
led

Note: The bottom middle LED indicates power and will remain lit as long as the power is supplied to the unit and the unit is turned on.
(1) Find a source (software program) that can isolate and play individual channels one at a time. Most sound cards will come with this type of software to help with this process. Alternatively, downloads are available from most sound card supplier websites.
(2) Insert each plug one at a time into the PC and play the corresponding channels. Example: with only the black jack (rear channels) inserted into the PC, play the rear speakers. Only the bottom left and bottom right LEDs should light up.
(3) Complete this test for each of the other channels remembering that each plug will play two channels:
(a) Green: Left front and right front
(b) Black: Left rear and right rear
(c) Gold: Center front and sub woofer
1-Year Limited Warranty
All Psyko products come with a 1-Year Limited Warranty that covers workmanship and parts.  All product returned to Psyko Audio Labs Inc under the 12-Month Limited Warranty will be done so at the expense of the customer including, but not limited to: courier charges, duties, brokerage and other customs fees.

Warnings & Cautions
Avoid Hearing Damage.
Volume should always be adjusted to a safe and comfortable level. The louder the volume the shorter your experience with the headset should be. Listening to the headset at high volume levels may result in your ears adjusting to the high volume - do not continue to increase the volume over time as this will continue to damage your hearing. If you or any other user ever experience ringing in the ears or cannot hear individuals while they speak in a normal setting, stop listening to the headset and visit a doctor in event of accident.
Should damage occur to the system as a result of it falling, being dropped, or struck or damage in other ways or if the system smokes, smells, or emits abnormal sounds disconnect the AC adapter from the AC outlet.
Do not repair the system by yourself.
Never modify the system. Unauthorized or improper modifications may cause a fire or an electrical shock. There are no user serviceable parts inside.
Never connect to the AC power of different voltage.
The AC power adapter is designed to operate on standard utility/mains power from 100 - 240 Volts AC at 50 to 60 Hertz nominal frequency. Operation at voltages or frequencies outside this range may damage the adapter and other parts of the Psyko 5.1 PC Gaming Headset System. Never use any AC adapter other than the one supplied.
Do not use system near water.
Avoid areas where water can splash on the system such as the bathroom, shower room, or kitchen. Water may cause a fire, damage to the system or an electrical shock.
Do not operate or leave the system:
  • in an area that is constantly exposed to the direct sunlight
  • near a heat source
  • in an area that is dusty, humid, or exposed to water or smoke
Never place the system on an unstable surface.
Avoid placing the system on surfaces such as shaky desk, inclined surface, or on a high place.
Never place anything on top of the system.
Do not place magnetic media near the system.
Headphone speakers cause magnetic fields. They may affect the media and make it unreadable.
Never pull out the cords.
When disconnecting the AC adapter from the AC outlet, hold the adapter itself, not the cables. When disconnecting the cables, hold the plug, not the cables. Never put anything heavy on the cables, and never break or hurt the cables otherwise it may cause malfunction, a fire, or an electrical shock.
Maintenance
If cleaning is required, disconnect the AC adapter from AC outlet, and wipe off with soft cloth. For removing heavy stains, use a cloth moistened with neutral detergent. Do not use inflammable or harmful fluid such as benzene or thinner.